Dosing and monitoring station for swimming pools POOL pH/Rx up to 500m3

POOL GUARD 1 PH / RX PANEL is an automatic system for proportional dosing and monitoring of PH and RX levels (RedOx – redox potential) for swimming pools with a volume of up to 500 m3 . The dosing station is controlled by a liquid flow sensor (included in the kit), if there is no flow, the system goes into standby mode. MAIN ADVANTAGES: simplified procedure for programming and calibration of pumps, interchangeability of metering pumps, simple operation and easily accessible flow-through strapping for maintenance. The POOL GUARD 1 PH/RX dosing system is supplied mounted on a chemical-resistant plastic panel (450x600x8 mm), in a complete set, ready for installation and commissioning TECHNICAL SPECIFICATIONS: • The system is based on DLX PH – RX/MBB metering pumps with integrated pH/RedOx controllers on option • Alarm on the time of continuous dosing, followed by switching off the dosing pumps • Dosing delay when the system is switched on • Level sensor (flow sensor)alarm • Setting of the alarm system according to the maximum concentrations of reagents (MIN/MAX levels) • Dosing modes: constant ON/OFF and proportional PROP • Setting the hysteresis • Pump capacity: 5 l/h– 7 bar • Measurement ranges: 0-14 pH; -1000 +1400 mV RedOx • Pump dust and moisture protection class: IP65 • Support for reagent flow and level sensors Composition of the POOL GUARD dosing system 1 PH/RX 2 pcs DLX PH-RX/MBB pump 5-7 230V 1 pc. PH level sensor with 5 m cable. 1 pc. RX level sensor with 5 m cable. 2 pcs. reagent level sensor with a 2 m cable. 1 pc. KIT –PH/RX filtration device 1 pc. set of installation and maintenance instructions 1 pc. calibration solution PH 7, 55ML 1 pc. calibration solution PH 9, 55ML 1 pc. calibration solution RX 475 mV, 55ML 2 pcs reagent injection valve 2 pcs reagent intake filter 2 pcs. reagent intake hose, 4x6, PVC, 2 m.p. 2 pcs. reagent discharge hose, 4x6, PE, 2 m.p.