0
TelegramViberWhatsapp
+38 063 3621231
+38 036 2622033
info@saleindustry.com
Product list
0
$0

Gear pump for viscous products EMSE EDP 1100, DN150, 100 m3/h, 3 bar (30 metres), 22 kW, 1000 rpm, cast iron body

Code: 1051976
(0 review)
ProducerEMSE
Materialcast iron
PumpTypegear type
Output pipe diameterDN150
Input pipe diameterDN150
Explosion protectionNo
Pump capacity, m3/h100
Drive Typeelectric
Country of OriginTurkey
Power capacity, kW22
Rate of turn, rpm1 000
Housing materialcast iron GG 25
Shaft materialAISI 420
Type of configurationwith engine
Installation Typehorizontal
Pressure, bar3
Gear meshing typeexternal
Gear material8620 STEEL
Show all features (18)
Ukraine: Pre-order only
Poland: Pre-order only
Germany: Pre-order only
Italy: Pre-order only
$15,363.73 (netto)
Добавить в сравнение
We deliver anywhere in the world
EMSE gear pumps of the EDP series, depending on the material of the gear part (cast iron, stainless steel), can pump viscous liquids such as fuel oil, polyester components, caustic resin, oil, glue, mineral oil, gel, grease, chocolate, soap raw materials, glucose, quaternary esters, glycerin, rubber, wax, honey, molasses, oil and many other liquids. The principle of operation: as a result of the rotation of the gears in constant engagement, a low and high pressure zone is formed. As a result, the fluid is drawn into the suction nozzle and, moving in the gap between the gear teeth and the housing, enters the discharge zone to the discharge nozzle. Gear pumps are reversible and can operate in both directions. These pumps can be connected to a drive in a variety of ways. These include: direct connection to an electric motor via a coupling, connection via a gearbox, connection via a V-belt drive, connection to a variable speed drive. (This connection method allows the speed of rotation to be varied and thus the flow to be controlled.) EDP pumps from model 1015 onwards are available with a casing with a heating jacket as standard. This feature allows for a wider range of process applications for pumping products that are prone to crystallisation at lower temperatures.
Category: Gear Pumps
ProducerEMSE
Materialcast iron
PumpTypegear type
Output pipe diameterDN150
Input pipe diameterDN150
Explosion protectionNo
Pump capacity, m3/h100
Drive Typeelectric
Country of OriginTurkey
Power capacity, kW22
Rate of turn, rpm1 000
Housing materialcast iron GG 25
Shaft materialAISI 420
Type of configurationwith engine
Installation Typehorizontal
Pressure, bar3
Gear meshing typeexternal
Gear material8620 STEEL
Loading...
Products from the same category
Bitumen pump G45*2-46/4/0.6/ C
15542
Producer
BTS Engineering
PumpType
gear type
Preorder
0
$5,029.62
Bitumen pump G54*2-46/6/1.0/ C
15543
Producer
BTS Engineering
PumpType
gear type
Preorder
0
$5,814.75
Bitumen pump G80*2-46/4/0.6/ C
15544
Producer
BTS Engineering
PumpType
gear type
Preorder
0
$7,109.59
Bitumen pump G90*2-46/4/0.6/ C
15545
Producer
BTS Engineering
PumpType
gear type
Preorder
0
$7,589.42
Gear Oil Pump KCB200-CCO/1/4/C
15546
Producer
BTS Engineering
PumpType
gear type
Preorder
0
$2,617.08
Gear pump for viscous products EMSE EDP 1006, DN80, 6 m3/h, 3 bar, 3 kW, 1500 rpm, carbon steel, Ex, PLAN 01 API SEAL
1050004
Producer
EMSE
Material
carbon steel
Preorder
0
$10,754.61
Gear pump for bitumen EMSE EDP 1030, DN80, 12 m3/h, 8 bar, 22 kW, 400 rpm, 380V with bypass
1050140
Producer
EMSE
Material
cast iron
Preorder
0
$11,061.85
Gear pump for viscous products EMSE EDP 1002, 1 inch, 1 m3/h, 10 bar, 1.1 kW, 1000 rpm, carbon steel
1051005
Producer
EMSE
Max. head, m
100
Preorder
0
On request
Gear pump for unrefined sunflower oil EMSE EDP 1030, DN80, 30 m3/h, 3 bar, 7.5 kW, 380V, 1000 rpm
1051519
Producer
EMSE
Material
cast iron
Preorder
0
$4,915.26
Gear pump for pumping engine oil EMSE EDP 1010, 1 1/2 inches, 10 m3/h, 3 bar, 3.0 kW, 1000 rpm, carbon steel
1051659
Producer
EMSE
Max. head, m
30
Preorder
0
$2,620.97
Contact us