Pump application: The Compatta series is ideal for pumping domestic wastewater due to its small size and mechanical characteristics.
Feature: The main components are made of GG20 cast iron in a standard configuration. The cuff seal is mounted on the engine side, and the mechanical seal on the impeller side is also available on request in the new version of the "EVO" with double mechanical seal at the rear located in the oil chamber.
Motor range: 2-pole short-circuited rotor motor; thermal protection integrated in the winding; insulation Class F 155°C; motor protection class IP68.
Engine cooling: engine cooling is provided by the liquid in which the pump is immersed.
Limits of use: maximum permissible liquid temperature: 40°C when the pump is fully submerged; maximum immersion depth: 20 m; permissible pH value: 6-10; hydraulic characteristics suitable for liquids with a density <1.1 kg / DM3; permissible voltage: 220v / 380V ±5%; permissible frequency: 50 Hz ±2%.
Symbols:
G - float
M-1 Phase 220V
T-3 phase 380V
M/G-single-phase with float sensor
T/G-three-phase with float sensor
2850 rpm./ min. - 2 poles 50 Hz
Horizontal pressure pipe (except Compatta 1-1, 5 with vertical pressure pipe)
